Because the various kinds of physical properties of PIOCELAN can be adjusted using polymer hybrid technology, a variety of series such as O and S is prepared.
The O series, which is suitable for the use of various structural components, has high shock absorption and is also adopted for use in the shock energy absorption materials of automobiles. It includes small E-type particles, which are suitable for foamed molded articles with more complex shapes, and the persistent antistatic NS type, which is applicable for use where static charges must be eliminated, such as transport cases for electronic parts.
The S series is suitable for use in various cushioning / packaging materials thanks to its high cushioning performances, while its high expansion ratio enables both resource-saving and cost cutting.
As for the details of each grade, we welcome your inquiries. We will propose the corresponding grade / type of PIOCELAN based on your requirements.
| Type | Expansion ratio (Times) |
Range of center value of expanded particles diameter (mm) |
Major use of molded articles |
| O series | Packaging material for Industrial parts Returnable container Returnable container for electric parts Core material for FRP, etc. |
||
| D | 15 20 30 |
2.9~4.2 3.2~4.6 3.7~5.2 |
|
| E (Small particle type) |
15 30 |
2.5~3.0 3.1~3.7 |
|
| ELV (Low VOC / Small particle type) |
15 30 |
2.5~3.0 3.1~3.7 |
|
| ENS (Static charge inhibited / Small particle type) |
15 30 |
2.5~3.0 3.1~3.7 |
|
| S series | General molded article Food container Packaging / cushioning material for heavy items, etc. |
||
| D | 30 40 50 |
3.8~5.4 4.0~5.8 4.4~6.2 |
|
| L series | |||
| D | 40 50 |
4.0~5.8 4.4~6.2 |
|
* We also have special grades in addition to the above-listed items. Feel free to inquire.
| Item | Complying standards | Unit | O series Type D |
S series Type D |
L series Type D |
||||
| Expansion ratio | − | Times | 10 | 20 | 30 | 40 | 50 | 40 | |
| Density | JIS-K-6767 | g/cm3 | 0.100 | 0.050 | 0.033 | 0.025 | 0.020 | 0.025 | |
| Compressive strength | 10％ | JIS-K-6767 | kPa (kgf/cm2) |
720 (7.3) |
310 (3.2) |
160 (1.6) |
140 (1.4) |
110 (1.1) |
160 (1.6) |
| 25％ | 830 (8.5) |
360 (3.7) |
200 (2.0) |
170 (1.7) |
130 (1.3) |
190 (1.9) |
|||
| Bending strength | JIS-A-9511 | kPa (kgf/cm2) |
1300 (13.3) |
630 (6.4) |
470 (4.8) |
340 (3.5) |
300 (3.1) |
400 (4.1) |
|
| Compressive permanent distortion | JIS-K-6767 | % | 18.2 | 16.9 | 15.9 | 15.2 | 12.7 | 16.4 | |
| Thermal conductivity 20°C | JIS-A-1412 | W/mK (kcal/mh℃) |
0.040 (0.034) |
0.037 (0.032) |
0.037 (0.032) |
0.038 (0.033) |
0.039 (0.034) |
0.038 (0.033) |
|
| Falling ball impact value | JIS-K-7211 Steel ball 321g t=20mm |
cm | 110.5 | 65.5 | 53.5 | 30.5 | 23.5 | 56.5 | |
* These data are not criteria, but samples of our measurement results.
